Friday, June 15, 2012

Tutorial: Ice bases I

Ok,so not so much a tutorial, as 'I tried this and here's what happened'

I was reading some blog/forum or other (sorry if you're reading this and it's you, but I just can't find the link)a few days ago, and I saw mention of ice bases. It struck some inspiration in me, ans i remembered a few years ago I had found some rubber moulds for rocks in a hobby store. I had tried to use these moulds with polyfilla as a quick and dirty way to make some scenic bases/scenery. That was a failure as the polyfilla never cured well in the moulds, and even a few years later the remnants on the moulds are rubbery and not set. Anyway, back to the now, and the idea came to me to fill one of the moulds with some Still Water. Ever keen to see what this stuff can be used for, I filled one of the moulds. As an afterthought, I realised this may have been better if I had first tinted the water with some blue/white paints. Instead, I ran to the fridge* and pulled out the baking soda, and sprinkled it on top (well the bottom of the rock). It floated, so I grabbed a spoon, and used it to push the baking soda into the Still Water. I then placed it on top of the fridge and left it to cure. 48 hours later, I pulled it out, and this is the result.
Flash to be trimmed
In the mould

Then on to cleaning up the 'flash', colouring the underside to give a tint to the ice, and finding a use for it. Both my Legion and Khador are Northern factions, and are therefore suited to ice terrain. Maybe a 'jack or 'beast base, as the mould I chose was larger than 30mm.




The above pictures show it off well, but in reality, it's a little too transparent, and there's no visible definition. A wash of some kind should bring out the details of the rock/ice pattern, but what colour to choose?


*As an aside, what is it with North Americans and their compulsion to put baking Soda in the fridge. I know the theory is that it soaks up the smells, but really, if your fridge smells, clean out the offending food! In all my years in the UK, I never had this problem, and yet here, every fridge! What's up with that?

5 comments:

  1. Can I try it in a french fridge?
    Good idea anyway, looking very impressive, and on the photos I find the colours ok...

    ReplyDelete
    Replies
    1. Yes, the colours look fine in the pics, but the flash bounces off the surface, hiding the transparency.

      As to the fridge, depends how much stinky cheese is in there! ;)

      Delete
  2. Nice idea. For a wash on these, I'd tend to go for a pale blue, maybe with a grey as well

    ReplyDelete
    Replies
    1. grey is a good idea, i was trying to think what blue would be best, without looking unrealistic, but grey in there would do the job. Thanks!

      Delete
    2. I agree with that, but perhaps a wash of a slightly blue-grey?

      Delete